I’m booting openwrt off a usb c thumb drive connected to a fanless Celeron mini pc. The pc is cool but the thumb drive is so hot i can’t touch it.

Any ideas?

  • empireOfLove2@lemmy.dbzer0.comEnglish
    47·
    6 months ago

    Don’t use a thumb drive, use an external hard/solid state drive or install an internal drive. Even an aliexpress 64gb ssd for $10 is better than any thumbdrive. Thumbdrive’s flash and controllers are not designed for OS level continuous writes and will die very quickly.

    If you must use a thumb drive, add some kind of air flow over it, and disable all logging features in openWRT to reduce writes as much as possible.

  • SGG@lemmy.worldEnglish
    14·
    6 months ago

    My guess is log files are being written to it? Might want to install a proper drive internally and redirect log storage. With less activity the USB drive should not heat up anywhere near as much.

    • mFat@lemdro.idOPEnglish
      5·
      6 months ago

      Thanks yeah I have a lot of services and Docker containers running on the device. I’ll try disabling logging.

      • SGG@lemmy.worldEnglish
        13·
        6 months ago

        If you have docker containers and other stuff all on that USB drive I’d really reccomend getting it all off that USB (not just logging) and onto a proper drive of some kind. USB thumb sticks are not reliable long term storage, you will wake up to find the drive failing one day and good chance you lose everything on it with little to no warning.

    • lemmyvore@feddit.nlEnglish
      4·
      6 months ago

      I wouldn’t call it normal. It’s the norm because the market is flooded with crappy drives using JMicron chips. Buy something with a Realtek or Asmedia chip and it will work fine without getting hot.

      • Shurimal@kbin.social
        5·
        6 months ago

        How does one find out what chips are in what USB sticks? Manufacturers don’t make this information available. At best you just find read and write speeds, usually just the max possible read speed and nothing else.

    • teawrecks@sopuli.xyzEnglish
      1·
      6 months ago

      It’s normal for it to heat up under load, but it’s not normal for it to be under load 24/7 indefinitely.

  • MangoPenguin@lemmy.blahaj.zoneEnglish
    10·
    6 months ago

    Pretty normal tbh, a lot of those thumb drives get very hot. Probably not great for its lifespan though.

    Best bet is install an SSD if you have a spot for an M.2 or 2.5" drive inside.

  • MMK21@programming.devEnglish
    3·
    6 months ago

    As others have said, thumb drives are generally designed for lighter loads than running an OS, so yours probably just doesn’t have enough of a heat-spreading design to keep it cool.

    To help you investigate what’s causing the thumb drive to be accessed so much, the iostat -d -x 1 will tell you what its percentage utilisation is (rightmost column). You can then use sudo iotop to see what processes are using the drive.

    In the long run though, I’d definitely recommend switching over to a cheap SATA SSD, especially since your mini PC will likely let you install one internally somewhere. In my experience, your system will probably feel snappier too!