Where should I mount my internal drive partitions?

As far as I searched on the internet, I came to know that

/Media = mount point for removable media that system do it itself ( usb drive , CD )

/Mnt = temporarily mounting anything manually

I can most probably mount anything wherever I want, but if that’s the case what’s the point of /mnt? Just to be organised I suppose.

TLDR

If /mnt is for temporary and /media is for removable where should permanent non-removable devices/partitions be mounted. i.e. an internal HDD which is formatted as NTFS but needs to be automounted at startup?

Asking with the sole reason to know that, what’s the practice of user who know Linux well, unlike me.

I know this is a silly question but I asked anyway.

  • atzanteol@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    3 months ago

    With Linux filesystem hierarchies you’re going to run into a lot of history, conventions, quasi-standards and simply deprecated implementations.

    It’s a problem of “there’s no bad way to do it so all options are equally fine”. From this arose some “guidelines” about /bin and /usr/bin, /var, etc. but few strict rules.

    For a long time there was no /media. In the '90s/2000’s you would mount your CD-ROM and floppies in /mnt (e.g. /mnt/cdrom, /mnt/floppy). That was awkward as we started wanting auto-mounted things and wanted to do it from user-space. So /media/username was created to allow you to mount things with your ownership.

    If it’s something you want permanently mounted but not part of a pool you can put it under any location you like really. I like locations under /var as historically /var is used for things that “vary”. You could just mount it in your $HOME if it’s something you’re going to use as a user rather than with a service.

    I have a “/exports” dir for NFS mounts (e.g. /export/media, /export/storage, etc.). Just keeps it tidy and in one location.

    The important thing is to use a standard that works for you and makes sense. There’s not a lot of bad places to mount things. If “/mnt” makes sense for you then go for it.

    • Nyanix@lemmy.ca
      link
      fedilink
      arrow-up
      1
      ·
      3 months ago

      To piggy-back off of this, it’s not entirely uncommon to create another directory at root in enterprise environments, using /data or /application That said, I only do that for enterprise, for my personal computer, my distro defaulted to auto-mounting to a directory for each drive inside of /mnt, and I rather like that and intend to stick with it.

      • Nik282000@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        3 months ago

        I know it is kinda frowned on but I like to use new directories at root to cut down on confusion as to where things are. Video storage for the NVR goes in /video, user data for Nextcloud goes in /data, etc. But I also keep everything in it’s own LXC so I don’t have one machine with 30 extra directories cluttering up the root.

  • cmnybo@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    2
    ·
    3 months ago

    Anything I add to fstab gets mounted in /mnt and removable drives get auto mounted to /media. Linux doesn’t care where you mount your drives, they can be mounted anywhere you want.

    • gpstarman@lemmy.todayOP
      link
      fedilink
      arrow-up
      1
      ·
      3 months ago

      Linux doesn’t care where you mount your drives, they can be mounted anywhere you want.

      Thank You

  • Nibodhika@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    3 months ago

    Permanent drives should be put wherever you want them to, for example I have mine mounted in /ld1 for Large Disk 1. /media is supposed to be used by systems to mount things you plug, but some systems move that to /var/run/media or other places. /mnt is there so you don’t have to create a folder in case you want to mount something really quick.

  • GuyNoIRQ@infosec.pub
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    If I remember correctly mnt is for static media that you expect to always be present and media is for removable media which may come and go.

    • gpstarman@lemmy.todayOP
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      My Files, which are inside the partition mounted in /mnt/something has root as Owner. So When I try to move something to Trash, it’s not allowing me to do, Only perma delete. When saw properties it said owner is root.

      Is it because mounted at /mnt?

      Files under /media seems fine. and says it’s owner is ‘me’

  • stoy@lemmy.zip
    link
    fedilink
    arrow-up
    0
    ·
    3 months ago

    That depends on your usecase.

    I have setup servers where I mounted extra drives on /srv/nfs

    When/If I switch to Linux I will probably mount my secondary drives to folders like

    /home/stoy/videos

    /home/stoy/music

    /home/stoy/photos

    /home/stoy/documents

    /home/stoy/games

    The ~/games will probably be an LVM since it contains little critical data and may absolutely need to be expanded to span several drives, though I would also be able to reduce the size of it and remove a drive from the LVM if needed.

    I’d make a simple conky config to keep track of the drive space used

    I’d just keep using the default automount spot for automounting drives.

    • gpstarman@lemmy.todayOP
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      If I’m not wrong LVM is a method which joins all your disk into single storage pool.

      Let’s say I stored data all across my LVM, now I suddenly remove one of the disks. What happen now?

      Also can I add more disks to LVM later?

      • stoy@lemmy.zip
        link
        fedilink
        arrow-up
        1
        ·
        3 months ago

        Yep, LVM is basically a software raid 0, I used it when setting up Linux server VMs for years at my last job, as far as I know they are still running fine.

        The VM system backed up all VMs regularly, so I used LVMs as it made increasing the storage on a server easier for me.

        Since it is just a raid 0 that can span several disks and one disk failiure can bring it down I don’t want any irriplacable data on it, so games from Steam seems like an excellwnt idea.

        That also means that being able to just have a volume spanning several disks would be an easy and simple way to increase storage when space is running tight.

        I am an avid hobby photographer and I would never trust an LVM without some kind of added protection, I am looking to get a Synology NAS with minimum of four drives raided in raid 5.

        I have a very old Intel NAS with used drives that I used for many years, but I don’t trust it anymore, I keep it powered off as a cold backup.

    • flux@lemmy.ml
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      My /home is also on a separate filesystem, so in principle I don’t like to mounting data under there, because then I cannot unmount /home (e.g. for fsck purposes) unless I unmount also all the other filesystems there. I keep all my filesystems on LVM.

      So I just mount to /mnt and use symlinks.

      Exception: sshfs I often mount to home.

      • gpstarman@lemmy.todayOP
        link
        fedilink
        arrow-up
        0
        ·
        3 months ago

        So you suggest not to mount like the guy above said /home/stoy/videos ?

        And suggest symlinks instead?

        • flux@lemmy.ml
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 months ago

          Yes, just mount to /mnt/videos and symlink that as needed.

          I guess there are some benefits in mounting directly to $HOME, though, such as find/fd work “as expected”, and also permissions will be limited automatically per the $HOME permissions (but those can be adjusted manually).

          For finding files I use plocate, though, so I wouldn’t get that marginal benefit from mounting below $HOME.

  • Heavybell@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    3 months ago

    IMO you should use LVM2 or one of the high level filesystems that have similar features, and then dynamically create partitions and mount them as needed. E.g. Suddenly need 50G for a new VM image? Make a partition and mount it where you need the space.

    • gpstarman@lemmy.todayOP
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      If I’m not wrong LVM is a method which joins all your disk into single storage pool.

      Let’s say I stored data all across my LVM, now I remove one of the disks. What happen now?

      • Heavybell@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        3 months ago

        You are correct, LVM combines 1 or more disks into 1 or more storage pools that can then be allocated out to logical volumes as needed.

        If you just up and pull a disk from a pool (volume group), you’re gonna have a bad time. You can, however, migrate the “extents” allocated to that physical disk to another in order to replace the disk, and your logical volumes can be set up with RAID-like redundancy. There’s a lot of options on how to manage it.

          • Heavybell@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            2 months ago

            No problem! To expand further, I am 99% certain it would be perfectly viable to have a single disk volume group and just take advantage of LVM’s ability to create, resize and delete virtual partitions on the fly. I think you could also put all your disks into a single volume group, then ask it to not spread your logical volumes across multiple disks, if you wanted to. Could get a bit fiddly though.

  • lazylion_ca@lemmy.ca
    link
    fedilink
    arrow-up
    0
    ·
    3 months ago

    I create /data and mount my 2nd drive there using fstab.

    I then mount /data/downloads under my user downloads folder so everything goes to my 2nd drive. That way I dont have to redownload anything if I redo my main drive.

    • Darohan@lemmy.zip
      link
      fedilink
      arrow-up
      0
      ·
      3 months ago

      I do a similar thing with ~/Pictures and ~/Music, which are symlinked to my NextCloud Sync folder on my much larger second drive. It’s good for saving space on my main drive, too, as those two folders contain a lot of data.

        • Darohan@lemmy.zip
          link
          fedilink
          arrow-up
          0
          ·
          3 months ago

          It’s like GDrive - except way more involved, you can do a lot with it. Files, office suite, photos, email, the works. There are hosts out there with various price points I’m sure, but I self-host so I can’t give any info on pricing I’m afraid.

            • Darohan@lemmy.zip
              link
              fedilink
              arrow-up
              0
              ·
              3 months ago

              It’s a wonderful thing if you can get a hang of it. Though fair warning, it’ll eat all your time for a fair while getting it set up 😂

              • gpstarman@lemmy.todayOP
                link
                fedilink
                arrow-up
                0
                ·
                edit-2
                3 months ago

                time for a fair while getting it set up

                That’s a sacrifice I’m willing to make.

                Also for some reason lemmy seems to rarely duplicate some comments. Now I’m seeing two of your same comment and two of my same reply.

                • Darohan@lemmy.zip
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  3 months ago

                  If I had to guess that’s gonna be a quirk of ActivityPub, and should self-resolve in a little bit, but I’m not an expert so don’t take me at my word there. I have some experience self-hosting setting up my own homelab over the last 2-3 years - if you’d like some “getting started” conversation, feel free to send me a DM or contact me on Matrix @darohan:tchncs.de