I am currently running most of my stuff from an unraid box using spare parts I have. It seems like I am hitting my limit on it and just want to turn it into a NAS. Micro PCs/USFF are what I am planning on moving stuff to (probably a cluster of 2 for now but might expand later.). Just a few quick questions:

  1. Running arr services on a proxmox cluster to download to a device on the same network. I don’t think there would be any problems but wanted to see what changes need to be done.

  2. Which micro PCs are you running? I am leaving towards HP prodesk or Lenovo 7xx/9xx series around 200 each. I don’t really plan on getting more than 2-3 and don’t run too many things, but would want enough overhead if I switch stuff over to home assistant and windows and Linux VMs if needed.

  3. Any best practices you recommend when starting a Proxmox cluster? I’ve learned over time it’s best to set it up correctly than try to fix stuff when it’s running. I wish I could coach myself from 7 years ago now. Would of saved a lot of headaches lol.

  • atzanteol@sh.itjust.worksEnglish
    2·
    10 months ago

    Use ZFS when prompted - it opens up some features and is a bitch to change later. I don’t understand why it’s not the default.

    • Possibly linux@lemmy.zipEnglish
      1·
      10 months ago

      I personally use both Btrfs and ZFS. For the main install I went with btrfs raid 1 as it is simpler and doesn’t have as much overhead.

      I was a little worried about stability but I’ve had no issues and was able to swap a dead ssd without issue. It been going for almost 2 years now.

    • AlphaAutist@lemmy.worldEnglish
      1·
      10 months ago

      From what I read disk wear out on consumer drives is a concern when using ZFS for boot drives with proxmox. I don’t know if the issues are exaggerated, but to be safe I ended up picking up some used enterprise SSDs off eBay for that reason.