Same. Firefox Mobile had been a laggy mess when I used it a few years ago, but a combination of some really aggressive advertising and the announcement of manifest v3 caused me to give it another shot about a year ago. It’s a dramatic improvement in phone browsing.

When I bought my 3 it was $2200 including the harness for my car. Now the newer 3X is $1450 including harness (economies of scale!). I’ve been running it for 2 and a half years now and have 80,000 miles logged in my unit.

I’m using it in a 2016 Civic Touring which was their original dev car model so it’s well documented and had a modification available to get necessary torque in tighter highway turns and be able to slow to and resume from stop. Other cars may work better or worse in terms of torque and ability to control speed. They have pretty extensive vehicle listings on their site and GitHub detailing the capabilities they are available depending on the car.

https://comma.ai/shop/comma-3x

I don’t work for Comma or anything, just am a fan of the tech and how it has allowed the controls in my car to get better over time rather than being stuck with what they shipped in 2016. My wife’s 2021 CR-V has better stock driver assist than my 2016 Civic, but my Comma’s assist experience today is far better than either stock system.

A Comma 3 driver assist system for my car. I drive a lot for work, and it’s an absolute game changer for driving distance as an enhancement to the stock LKAS and ACC systems. Highway miles are dramatically less strain and effort, and it makes me more able to watch the flow of traffic and keep an eye out for hazards. Their tagline is that they’re “making driving chill” and it’s definitely the case as long as you have a fully compatible vehicle.

Lots of good advice here. I’ve got a bunch of older WD Reds still in service (from before the SMR BS). I’ve also had good luck shucking drives from external enclosures as well as decommissioned enterprise drives. If you go that route, depending on your enclosure or power supply in these scenarios you may run into issues with a live 3.3V SATA power pin causing drives to reboot. I’ve never had this issue on mine but it can be fixed with a little kapton tape or a modified SATA adapter. It’s definitely cheaper to shuck or get used enterprise for capacity! I’m running at least a dozen shucked drives right now and they’ve been great for my needs.

Also, if you start reaching the point of going beyond the ports available on your motherboard, do yourself a favor and get a quality HBA card flashed in IT mode to connect your drives. The cheapo 4 port cards I originally tried would have random dropouts in Unraid from time to time. Once I got a good HBA it’s been smooth sailing. It needs to be in IT mode to prevent hardware raid from kicking in so that Unraid can see the individual identifiers of the disks. You can flash it yourself or use an eBay seller like ThArtOfServer who will preflash them to IT mode.

Finally, be aware that expanding your array is a slippery slope. You start with 3 or 4 drives and next thing you know you have a rack and 15+ drive array.

Ditto. Mine was stolen out of my car 9 years ago and I still miss it.

I don’t think I realized that was a limitation because I’ve been using the Vaultwarden fork. https://github.com/dani-garcia/vaultwarden

Same, though I’ve got a couple Decepticons sprinkled in. They all connect to the Allspark ssid.

I’ve been using the Killswitch since the non-magnetic version came out. It makes the whole system a little larger, but has a nice grip for holding and protects it well in my bag. It also takes up a lot less space in my bag than the stock case did. I haven’t had any issues plugging in USB-C cables into what ends up being a recessed port with the case on.

Seconding the Shield, for all of the above plus Nvidia’s update commitment to it. IIRC the 2015 Shield is the longest continually updated Android device ever. I have a 2015, 2017, and a 2019 at my house, and a couple of 2017s at my parents’ place. I upgraded the older ones to the toblerone remote last year. All are still working great, and continuing to receive regular updates.

My error, I just checked and apparently it’s actually a Precision. I don’t deal in Dells so I don’t know all their nomenclature! It’s still been a downgrade though from my ThinkPad.

Well said. I had hardware that was killed by “upgrades” or manufacturers discontinuing them from their cloud features. I now instal locally controllable hardware as much as possible and it has led to a much more stable and long term reliable smart home. Everything ties back into Home Assistant. The only remaining things I have with a cloud-reliant integration are the robovac our Nest Protect Smoke Alarms, and smart vents. The only reason they’re cloud controlled is there wasn’t a viable option that met feature and price point requirements. Everything else, (65+devices) is local Wi-Fi/Homekit ZigBee or Z-Wave

Even on the Windows side of things they’re frustrating. Company took my perfectly working Thinkpad and replaced it last September with an “upgraded” Dell Inspiron laptop. It’s a piece of crap. Wakes up all the time in my bag, randomly drops wifi, and randomly drops ViewSonic monitors. Official IT solution: this happens sometimes, we don’t know why, and we’re going to send you Dell monitors instead.

*Edit I guess it’s actually a Precision, not Inspiron. I don’t buy Dells so I don’t know all the names!

Are you in the US? I believe call screen is region limited.

There’s a bit more to it than just the Central Perk part. They’ve recreated the apartments and a few other major scenes and have a lot of props from the show. We had just finished a rewatch of the show and found it pretty enjoyable on a rainy day in the city. I think we spent about an hour in there and came out with some cool staged scene pictures. I still thought it was overpriced, but didn’t feel ripped off.

I think about the Ameristan stuff and people being “facebooked” all the time since reading that book. In the time since I read it I feel like we just keep getting closer and closer to that reality.

I’ve been using one for several years now with one of the documented switches that add multiple ports. https://docs.pikvm.org/ezcoo/#connections First in a DIY and then with the v3 hat Kickstarter I guess total I’m at $270 between the Kickstarter HAT and ezcoo switch plus the cost of a Pi (which I already had) I can reach 4 machines over my Tailnet and jump between them reliably. I can also control power on my primary server. (others are on a network managed PDU and can be forcibly reset that way if needed)

I had an old console from a job but it was so old that it required an ancient version of Java to access through the web interface. I’m sure there may be better options, but for my homelab setup the pikvm has worked well at a price that fit in my budget.

Another happy framework user. I have the AMD 13. The modularity allowed me to completely disassemble and clean/save the machine when my wife spilled an entire chai latte on a 1 week old computer. Fan can get a little loud, but the machine just works great and there’s a great community around it.

I’ve been using obsidian-livesync for a couple months now. Works great cross-platform since it runs directly out of my Vault and doesn’t cost $8/mo. Mine is running on fly.io right now but I may eventually move it to my own machine. https://github.com/vrtmrz/obsidian-livesync/

I can’t help feeling like Obsidian really missed the mark on their pricing here for hobbyist & home users. I can’t justify paying substantially more than something like iCloud or Google Drive storage when I’m using Obsidian to just sync some text and a few documentation images. Something like $1-2/mo would have been an instant buy for me, but at $8 it was worth my time to investigate other ways of syncing.

My aftermarket Openpilot setup does this with a camera pointed at the driver. I’m good about paying attention but apparently if it alerts too many times that you’re distracted it will disable itself until you restart the car.

Perfect analogy. I completely shill for both Bitwarden and Brother printers because they legit are just that good. When I find products like that they’re what I push to my family and friends because they “just work.”