• MightBeAlpharius@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 day ago

    Their math was flawed, but I’m not really sure how to explain the math part better. I get what they were going for, though.

    It’s closer to decimal divisions of an inch, so a .223 caliber bullet would be a hair shy of a quarter of an inch (.25) wide.

    Edit: just realized you had the second part of that already

    • exasperation@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      8
      ·
      1 day ago

      That still makes no sense. Is the commenter surprised to learn that a 0.223 inch caliber is approximately 0.223 inches? That a .45 inch caliber is about .45 inches? Yes, that’s how units work.

      • evasive_chimpanzee@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        edit-2
        1 day ago

        But you don’t call it “point four five caliber” you call it “forty five caliber”. Similar is 7.62 mm AKA “thirty caliber”. It’s reasonable that someone wouldn’t know that it’s literally just hundredths of inches.

        Shotgun gauge is wonky, so it’s not a given that the number would just be a diameter in units they are familiar with. “Grains” are also a meaningless unit to most people.

        • baldingpudenda@lemmy.world
          link
          fedilink
          arrow-up
          5
          ·
          1 day ago

          What do you mean? its 7000 grains in a pound. 27ish grains to a dram, 16 drams to an ounce, and 16 ounces to a pound. Pretty straight forward.

          Also dont confuse an ounce(oz) and a fluid ounce(fl oz). That’s 8 fluid drams to a fl oz, 16 fl oz to a pint, 2 pints to a quart, and 4 quarts to a fucking gallon cause it makes sense. Obviously, 63 gallons to the hogshead.

          source

        • exasperation@lemmy.dbzer0.com
          link
          fedilink
          arrow-up
          3
          ·
          1 day ago

          Shotgun gauge is wonky, so it’s not a given that the number would just be a diameter in units they are familiar with.

          Yeah, it’s not intuitive that bigger gauge numbers = narrower diameter unless you’ve specifically worked with wire or shotguns before.